deniz.in

Markets

Weather

Loading weather

· via Hacker News – Front Page (native)

Floppy3.5 is a battery-powered WiFi NAS that reads photos off 3.5-inch floppies

An open-source hardware project that hit Hacker News builds a pocket-sized WiFi NAS that reads 3.5-inch floppy disks from cameras like the Sony Mavica, shows the photos in a browser, and archives them to microSD.

Floppy3.5 is a battery-powered WiFi NAS that reads photos off 3.5-inch floppies

A pocket NAS for 3.5-inch floppies

An open-source hardware project named Floppy3.5, which landed on the Hacker News front page, tackles a very specific problem: photos trapped on the 3.5-inch floppy disks that late-1990s digital cameras such as the Sony Mavica used as storage. The device is a self-contained, battery-powered unit that reads a disk and serves its contents over WiFi as a web page you can open on a phone or laptop, with an option to archive everything to a microSD card.

According to the project's GitHub repository, the unit handles any standard FAT12-formatted 1.44 MB high-density disk and lists the files stored in the disk's root folder on its web interface.

Two chips, one board

The design splits the work between two microcontrollers sitting on a single custom PCB. A slimline 26-pin 3.5-inch drive — the design targets a Sony MPF920-type unit that runs on 5 V only — feeds an RP2354A controller that speaks the Greaseweazle host protocol, an interface familiar from open-source floppy-controller projects. The controller passes data over a custom SPI link to an ESP32-S3 module, which decodes the disk and serves the files over WiFi at floppy.local. Both firmwares can be updated over the air, and the controller can also be driven from a PC with the gw tool over a secondary USB port.

The author notes the first prototype was messier: an ESP32 development kit, a separate Greaseweazle-style adapter board, and a full-size desktop floppy drive. The current revision folds the two processors, the charger circuitry, and the power supplies onto one board sized for the slimline drive.

The bill of materials includes an ESP32-S3-WROOM-1-N16R8 module with 16 MB of flash and 8 MB of PSRAM, SN74LS07 bus buffers, a BQ25180 charger paired with a MAX17048 fuel gauge, an LTC2954 power button controller, 3.3 V and 5 V regulators, a real-time clock, a microSD socket, a 1.9-inch 170×320 ST7789 LCD, and a roughly 4000 mAh single-cell LiPo battery.

Built around how those cameras behaved

Several design choices reflect the quirks of floppy-era cameras. Because a Mavica restarts its file numbering at MVC-00001 after a disk is erased, every archived disk gets its own numbered folder on the SD card rather than a flat dump. The device hashes each file with SHA-256 and skips photos already present on the card, and it will not recopy an entire disk it has already archived unless you force it with a long press.

Physical controls are minimal: READ pulls a disk into memory for browsing without touching the SD card, SAVE copies the files across, and two more buttons manage the display and power. On-screen status icons report WiFi connectivity, an in-progress read, whether a decoded disk is in memory, SD card presence, and a warning if the last read hit bad sectors or failed.

Setup follows the usual pattern for ESP32 gadgets: the device first broadcasts an open access point called Floppy-Setup, you enter your home network credentials through a captive page, and afterwards it is reachable at floppy.local.

Everything needed to build one

The repository is thoroughly documented. It ships Gerber files for the PCB, a schematic with part values, an assembly drawing, printable STL and 3MF files for a two-piece housing, and full firmware sources for both chips — pico-sdk for the controller and ESP-IDF for the bridge — plus prebuilt binaries and a self-test firmware for validating a newly assembled board. The author credits PCBWay with subsidising the board.

Two practical warnings come from the documentation: check the battery connector polarity before plugging in the cell, since a reversed connection can damage the LiPo and create a fire risk, and note that the board will not boot on USB power alone because the voltage sags too far at power-on.

Why it matters

Cameras like the Mavica stored ordinary JPEGs on ordinary floppies, which means a generation of family photos may still be sitting in desk drawers while working floppy drives disappear from modern computers. Floppy3.5 turns disk rescue into a phone-friendly task that needs no PC, no vintage hardware, and no screwdriver-round of cables. And because it reads any FAT12 1.44 MB disk, its usefulness extends beyond camera photos to old document archives. As an engineering artefact, it is also a clean reference design — a Greaseweazle-compatible controller and an ESP32 web bridge merged on one battery-powered board — that could be adapted to other legacy media.

  • #open-source-hardware
  • #esp32
  • #retro-computing
  • #floppy-disks
  • #data-recovery